PARKER D1VW020BNJWI5N

Parker, Directional Control Valve
with Inductive Position Control
- Series D1VW,
Part #: D1VW020BNJWI5N

Parker, Directional Control Valve with Inductive Position Control - Series D1VW,

Part #: D1VW020BNJWI5N

The NG06 direct operated directional control valve D1VW with inductive position control provides high functional limits up to 80 l/min in combination with a low, energy saving pressure drop. It is typically used in safety relevant applications.

Technical Specifications

Seal Material:	NBR
Spool Code:	020
Solenoid Option:	With manual override
Position Control Type:	Start position monitored side B
Input Voltage:	24 V DC
Spool Position:	2 positions, spring offset in position b, operated in position a
Port Connection:	NG06 / CETOP 03
Mounting Type:	Sub base, manifold
Actuation Type:	Solenoid
Function:	2-way
Maximum Operating Pressure:	P, A B: 350 ; T: 210 bar
Maximum Flow Rate:	70 L/min
Maximum Operating Temperature:	60 °C
For Fluid Type:	Hydraulic oil according to DIN 51524
Seal Material:	NBR
Weight:	1.8 kg
Minimum Operating Temperature:	-20 °C
Body Material:	Cast iron

Item Information

Parker’s direct operated directional control valve series D1VW with inductive position control in NG06 (CETOP 03 / NFPA D03) features low energy losses due to optimized flow passages. It offers high functional limits up to 80 l/min and a maximum pressure of 350 bar.

This on/off valve is typically used in safety relevant applications. It complies with the machinery directive 2006/42/EG for use as clamping valve according to EN 201:2010. The start or the end position can be monitored. The position control is available for single and double solenoid valves.

Markets:
• Industrial
• Molding

Features/Benefits:
• High functional limits – low forces resulting in safe operation also at high flow rates
• Low pressure drop – resulting in low energy losses in operation
• Wide product offering – many different options – all valves from one single source
• Short delivery time – no warehousing necessary

Applications:
• All types of safety relevant applications
• Injection molding (safety component according to machinery directive 2006/42/EG)

Attention:
The adjustment of the position control is factory set and sealed. Replacement and repairs can only be undertaken by Parker.

The fail-safe position of the directional valve during power failure is the spring offset or center position.