0510525009 AZPF-11-011RCB20MB

Introduction:

HYDRAULIC GEAR PUMP AZPF-11-011RCB20MB
0510525009
11 cm³/rev, Clockwise rotation, Conical 1:5,
Rectangular flange Dia. 80 mm,
Rectangular flange to fitting ISO 8434-4

Detailed introduction

HYDRAULIC GEAR PUMP AZPF-11-011RCB20MB

0510525009

11 cm³/rev, Clockwise rotation, Conical 1:5, Rectangular flange Dia. 80 mm, Rectangular flange to fitting ISO 8434-4

Product discription:

The key task of external gear pumps is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure).

To avoid unnecessarily high heat losses, units with high efficiencies are sought after. These are realized by means of pressure-dependent gap sealing and high-precision manufacturing technology.

Consistent high quality based on large-volume production
Drive shafts according to ISO or SAE and customer specific solutions
Long service life
Slide bearings for high loads
Port connections: flanged or threaded

Product attributes
Max. flow [l/min]	44.0
Nominal size [cm³/rev]	11
Max. intermittent pressure [bar]	280
Maximum rotational speed [rpm]	4000
Drive shaft	Conical 1:5
Direction of rotation	Clockwise rotation
Front cover	Rectangular flange Dia. 80 mm
Housing material	Aluminum
Noise level	Standard noise level
Application	general
Product	External Gear Unit
Function	Pump
Model	Model F (4 ... 28 cm³/rev)
Series	Bearing diameter 18mm
Version	phosphatized, pinned
Port connection	Rectangular flange to fitting ISO 8434-4
Sealing material	NBR
Rear cover	Standard (cast iron)
Weight [kg]	3.55